Feeding machine parameters

1. Main parameters of the equipment

serial number

name

Main performance

one

Motor reducer

0.75Kw

two

encoder

speed detection

three

Feeding channel

Dual channel use, or single channel independent use

four

feed rate

adjustable

five

call the police

Slip and power outage alarm

six

power supply

220V50HZ

2. Equipment Introduction

2.1 Equipment Usage

This equipment is suitable for online addition of linear metal additives (aluminum titanium boron wire) during the melting and casting process, to improve the internal structure of aluminum materials and enhance their quality performance.

2.2 Aluminum refinement principle

The ideal aluminum material structure has uniform and fine equiaxed grains, uniform deformation during processing, excellent performance, and good plasticity, which is conducive to plastic processing. To obtain this type of organization, it is usually necessary to refine the melt.

Aluminum titanium boron wire is currently the best microstructure refinement additive, and its TiAI3 and TiB2 particles can effectively promote nucleation, suppress grain length, and facilitate grain refinement; Online joining ensures the effectiveness and uniformity of its refinement effect.

3. Main components and structural performance of the equipment

3.1 Equipment composition

The main components of the feeding machine equipment include: motor, reducer, coupling, guide wheel, encoder, control cabinet, bracket, electrical control cabinet, etc.

3.2 Structural Performance

1) Bracket: Welded from steel plates, easy to install in any position required by customers.

2) Transmission part: composed of motor, reducer, coupling, guide wheel, and adjusting spring.

The guide wheel is composed of upper and lower wheels, with the lower wheel being the main transmission and the upper wheel being the driven wheel; Adjust the tightness of the upper wheel by adjusting the spring; When the wheels are driven by the motor to rotate, the aluminum wire inserted through the threading hole is transported to the destination position by the clamping movement of the two wheels.

3) Encoder: detects the length of the wire feed to meet the required length of the wire feed.